Meraki AP Poor 5ghz Range – FIXED

I have been doing wireless for some time, and while some day I hope to be as skilled as Steve the @wifijanitor so a quick plug for Steve. It seems every day you learn something else, and sometimes it comes as an embarrassing and unnecessary TAC ticket which response reads like “Yep, that’s by design, read this”  and you end up feeling like “Gosh I should have known that”.

If you are like me, and have a single Meraki AP at some sites, or have a single Meraki AP in a lab or home — keep reading, there is something important here.

Background

I have had some sporadic range issues with Meraki AP’s for some time, not being able to really figure it out, and only running in to it occasionally it was not bothering me that much.   Recently however I ran into a client who was not deploying ubiquitous coverage across the entire building and they came to me and said “We had much better coverage with our 1140’s in this area”

Interesting – I have an 1140 in my lab, and I had the same problem as well, so I started to investigate more.

In a non fully overlapping environment I commonly “Use 100% power” or in environments where we just want to get as far as we can

always100%

The Problem

My client called me up later on thinking he had found the problem and indeed he had,  “Why are some of my MR26 AP’s only cabable of 17DBM and some are capable for 30dbm and some 24Dbm”

ap2

That is good question!   So off to a support ticket I went – ok ok ok, I could have googled it more, but we do pay for support right?  It was the end of the day, I had somewhere to be, and I figured I would let support school me a bit.

Why?

As it turns out “Always use 100%” is a little bit of a half truth on the 5GHZ band.    Let us look at this table from wlanspros.com

5GHz-Frequency-Allocations

If we discuss 20mhz channels,  UNII-1 channels 36-48 are POWER LIMITED by the FCC because of all the users in that band.  For indoor applications you are limited to 17 DBI or only 50mw   Ouch!

The other problem, is that in 2 of my dashboards at sites with only a single AP, and one with only 2, I caught the channel planner using UNII-1 Channels 36-48 by default!    I would like to point out, all of these sites had no other channel noise or problems that would cause the AP to channel switch due to noise.

ap1

Why would the dashboard choose these low power channels by default?   You would think they would start at least in the band that allows 24Dbm, or even the higher channels that support 30DBm – especially if I specified always use 100% power, you would think it would chose the channels where it can run higher power.    Instead by default it chose the lowest power channel option.

The Solution

By now the solution is pretty easy, hard code your channel, and hard code the power – and you are good.

Choose a channel that is not 36-48, and you can get 100mw,  if you go into the UNII-3 channels you can even go to a full 1W, but with 100mw clients this may not help you and just wipe out that channels to neighbors.

This works ok in quiet environments (My lab is in the country, 1000 yards from anything else, my noise floor is super low), however this may cause problems in other environments.  Also keeping in mind pushing 30Dbm – 1W of power on channel 161 may do you little good if clients operate at 100mw so simply pumping the power to full blast may not be advantageous or the best idea.

The other problem is hard coding channels makes the rest of the “AUTO” AP’s do funny things.

“Make a wish”

As you know the Meraki dashboard has a “Make a wish” option – please go in there and request the following “Please allow individual channel or band blocking or allow”  I have run into other clients where customers need specific channels barred, or bands barred because of other devices in band (Zigbee on 2.4ghz as an example) so this feature is needed for more than just this situation.

What is #DCloud and the new DCloud @Splunk Lab

I have not written much on the blog about DCloud, and I spend days and then not days on DCloud testing and learning.  It is currently one of my favorite tools from Cisco, and something that no other vendor in the industry is doing.   Cisco is spending a ton of dough on this, and for good reason.

What is DCloud?

What is the worst thing about your lab, assuming in this day in age you even have one?    Unless you are extremely vigilant, it is always broken.   Someone is in a rush, they do something in the lab which almost always involves changing something or breaking something and then when you need it, it’s broken.

The other problem is that your lab is really only setup one way.   Do you have 3 versions of UCCX?  How about 3 different management tools.    I am sure Justin Chin-You @jchinyou does over at Cisco, but for many of us it does not work that way.

What DCloud does is give you the ability to test, demonstrate and run 143 (as of this writing, they are constantly adding more) different labs, demos and sandboxes.   On everything from iWAN, ACI, Voice, Video, Routing, Switching, Management tools, SDN and many more.    Instantly.

Checkout this quick Youtube video from #DCloud Steve

They even have real hardware for some demos, and if you want you can connect real telephones to it — Wait.. how?   They have a slick VPN setup, with pre made configs that you can use to extend the lab right into your office.

It really is that good.    Labs turn up in moments,  everything is just setup and ready to go – and you can either follow their lab guides for demos or learning — or just login and mess around.   Don’t worry you cannot damage anything when you are done the lab resets automatically.   This is no simulator, this is the real deal and you are more than welcome to hack around and learn.   They even have traffic simulators so that when you do firewall and security labs, there is actual traffic in there.    You get full admin access – passwords for god access into everything.   Build your own demo or lab scripts based on their hardware setup if you want.   This is not just for demo.    Ever wanted to play with a new technology like iWAN or SDN and just do not know where to start?   They include a full PDF lab guide for you with step by step instructions if you want.

Here is a quick video posted by the #DCloud team showing one of my favorite labs

Hot off the E-Mail presses – #DCloud Rolls Splunk

One tool I just have not had enough time with – is Splunk.  Did you know Splunk made software – they make more than t-shirts.     Splunk does an amazing job of visualizing and analyzing security products in a consolidated way.    Now you can actually get your hands on it, in DCloud and try it your for yourself without the pressure of a timeline.

Here is the descriptor right from the DCloud site.

Splunk and Cisco have collaborated to deliver out-of-the-box visibility across Cisco-centric security environments using ASA/PIX/FWSM firewalls, Identity Services Engine (ISE), pxGrid, FirePOWER IDS, Advanced Malware Protection (AMP), Web Security Appliance (WSA) and Email Security Applicance (ESA). The scenarios in this solution illustrate how the Cisco Splunk Security Suite delivers unified visibility across Cisco devices to help:

  • Protect you before an attack happens
  • Enable you to respond quickly during an attack
  • Enable you to perform a rapid forensics investigation after an attack

Splunk Enterprise 6.2 with Cisco Security Suite v1 provides a consolidated view of your organizational posture across the entire Cisco security environment, with the ability to drill down into specific areas, including:

  • Email security using ESA.
  • Web security categorizes web traffic coming from the proxy using the WSA.
  • Network security presents data from Cisco ASA pix, Next Generation Firewall with FirePOWER IPS, and new detection data.
  • Identity services present user and device information from the ISE policy management platform.

Ranges of trigger alert thresholds can be set to queue events, leveraging data from multiple security routes and sources. Using this solution, it is possible to combine Cisco AMP data with device information from ISE in order to identify infected devices and classify events.

Scenarios

Scenario 1: Dashboard Overview

Scenario 2: Service Impact Analysis

Meraki CAN do 2.4Ghz only on wireless

If you look in your Meraki Dashboard you will see the following options for an SSID.

Your options are Dual Band, Only 5Ghz,  or Dual Band with Steering.    What no 2.4Ghz only??

Screen Shot 2015-08-21 at 9.57.40 PM

In some challenging wireless environments, specifically those where you do not have 100% coverage, and especially those with a lot of concrete, leaded glass and other RF challenges – 5Ghz can be problematic.  Some devices just love to hold on to 5Ghz connections even if the 2.4Ghz signal is better.    We do not always have control of our clients as well, especially in a guest world.

To help in these challenging environments, I have found that disabling 5Ghz outright keeps clients on 2.4Ghz and then they do not roam around as much and signal penetration is better.

There are many reasons why you might want to force users on to 2.4Ghz.

  • You want to band segregate users groups –   Voice or Corporate users on 5Ghz, and Guests on 2.4Ghz
  • You have challenges in the 5Ghz world, due to co-existence with another network, interference or environment.
  • You are integrating with an existing network and want band parity
  • You are in a region where 5Ghz can not be used

Well, there is a solution!    As with many things in the Meraki world — this CAN be enabled in your dashboard, but only Meraki support can do it.   Simply do what you do all the time,  open a case and ask for 2.4Ghz to be enabled in your dashboard.

Screen Shot 2015-08-21 at 9.56.31 PM

There it is!  2.4Ghz band Only is now an available option.  The questions is — why do I need to keep asking for really basic things by calling support.

Meraki goes iWAN, but retires a marketed feature.

Cisco iWAN

If you have not read up on Cisco’s iWAN architecture it is pretty cool stuff.     I will not explain the entire concept, but provide you a link to read on.

http://www.cisco.com/c/en/us/solutions/enterprise-networks/intelligent-wan/index.html

The concept is pretty simple, instead of having a WAN circuit like an MPLS, and then an Internet with a VPN backup that is inactive,  Intelligent WAN will let you use both the WAN and the VPN at the same time based on all sorts of things, link performance, latency and application routing.  It is all based on PFR and various topics which I will admit – I am not that good at, I have however looked at it, and it is VERY complicated.   After speaking with a colleague who set it up, his message was “It works well, but it was hard to setup and get working properly”

Meraki Goes iWAN!

Today Meraki announced more details about how they are adding iWAN technology to their portfolio.

Link here – https://meraki.cisco.com/iwan

They explain it pretty simple – Dual Active Path and intelligent path control.     If Meraki can bring the Meraki simplicity to something as complicated as iWAN  — All I can say is, bravo.   This is not a simple technology to setup, and Meraki has a history of making the complicated simple.    As soon as I can get my hands on this I will be testing it out, I have a few clients that will be extremely happy to hear about this.

Imagine if your Intranet, Sharepoint site, and other services could be sent over Internet VPN, and file sharing over expensive WAN links.     The savings could be significant, and now iWAN can be used by the SMB marketplace.     I know that @networkingnerd is always asking the question — is Meraki Ready for Enterprise  — if they keep doing things like this — and if the implementation is good this will be a huge step forward.

Now for the down note.

Meraki removes WAN Optimization

This is not the first time Meraki has retired a feature, some of the MR series used to support PPPoE  as an example.

To quote a recent email blasted from Meraki

After careful review, Cisco Meraki has determined that the current WAN Optimization feature in the MX Security Appliance product line does not meet the quality standard that our customers and partners deserve. As a result, the decision has been made to retire the WAN Optimization feature. This will allow the Meraki team to focus efforts on providing the best security platform in the industry for distributed networks.

   Wait a second — Didn’t Meraki market this feature – as an example in this blog post.   What if a customer purchased this feature only to find out that

  1. They are removing it by end of 2015
  2. You are forced to implement a new feature which means possibly bringing in a partner or support person to help
  3. Between now and the end of 2015 there will be no more bug fixes

How would you feel if you were marketed this feature, and then it is removed, with no idea on how the new feature will function and if it will provide the same features or not.

    The argument could be made that if you purchased a NON Cloud product, and that feature was working just fine – you could keep it because it works for you – however in this case Meraki because of the cloud controller concept is removing a feature regardless of how the end user customers feel about it.     While I am sure if I pour through the fine print at Meraki Policies there is something that says “Yeah we can just remove features you paid for”

     This is the kind of stuff that makes people nervous about “Cloud” controlled products.    We will see how this ends up.

Guerrilla marketing does not mean social engineering

I recently received this ad-mail.

img-150819173525-001img-150819173525-002

How do I know it is ad mail?  Well it appeared in my mailbox, it has no address on it, it is obviously screen printed, and others received the exact same notice.

The company – BlueSky GreenValley http://www.blueskygreenvalley.com/ and they are trying to get you to purchase a MicroFIT system, for those not in Ontario Canada, it is a feed in program that you can get paid for installing solar on your home.

This company is clearly attempting to use social engineering techniques to get people to call them and hear about their product.  When you call they ask for personal information which I am sure they database.

We are teaching people to avoid real scams, and here is what appears to be a legitimate company, using what in my opinion is a deceptive marketing practice, and methods normally employed by criminal organizations to market their product?

The questions that come to mind when I received it range from things like…  If you are willing to trick me in this way to get me as a customer, how will I be treated when I am a customer?

So when does guerrilla style marketing become dis-honest?   When it turns to trickery, and dishonest advertising

Does this go as far as fraud?    I don’t know, this is something authorities would have to decide.   The criminal code says…

False or misleading representations

52. (1) No person shall, for the purpose of promoting, directly or indirectly, the supply or use of a product or … any business interest, by any means whatever, knowingly or recklessly make a representation to the public that is false or misleading in a material respect.

In my opinion they knowingly made a misleading representation with this advertisement mailer.

I would think this is a deceptive marketing practice as well

Misrepresentations to public

74.01 (1) A person … who, for the purpose of promoting, … the supply or use of a product or … any business interest, by any means whatever, (a) makes a representation to the public that is false or misleading in a material respect.

The key phrase is “Material Respect” — In my mind suggesting I have a package that I do not — which is the entire intent of this face notice — IS MATERIAL.

The penalties are severe

Using mails to defraud

381. Every one who makes use of the mails for the purpose of transmitting or delivering letters or circulars concerning schemes devised or intended to deceive or defraud the public, or for the purpose of obtaining money under false pretences, is … liable to imprisonment for a term not exceeding two years.

I think that is all I have to say on the matter.

Getting Squiddy With it with Meraki MX

Everyone here who has used web caches, or Squid proxy knows that sometimes — it just doesn’t go as planned.

Meraki MX devices have an option for this…   Security Appliance,  Traffic Shaping

webcache

Enabling this turns on the Squid Proxy.  So if you have sites with issues — you would turn this off too during troubleshooting — as I did.

Well here is the problem —- there are three ways to enable Squid that you don’t know about

1) Enabling HTTP Content Caching in the Traffic shaping

webcache

2) Enabling “Full List” for the URL Category Size in Content filtering

3) Enabling Web Search Filtering

4) Enabling Youtube for Schools

fulllist

Unless these options are set as above — SQUID PROXY IS ON.   I have caught Squid malforming HTTP requests in the past, and had it happen recently with a proxied session that didn’t like being proxied (yes say that 5 times fast)  bottom line, until I set as above – Squid was on and there is no real way to know.

So when in doubt – lose the calamari and test your surfing.

Dedication Sickness – How working hard can hurt you permanently.

In the IT industry, we work evenings, nights and weekends.  It is just part of the job that we do.   In our early years many of us worked very hard trying to earn our place among the technology greats, and part of doing that was paying our dues at 1:00 AM.    These were great times for many of us, and the best learning opportunities were under pressure.

This is my story.   This is not some contrived blog post based on studies, this is what happened to me 15 years ago, so if you are new to the industry — keep reading.

The longer you work, the more you become sleep deprived.  The National Highway Traffic Safety Administration estimates that fatique is the cause of 100K accidents and 1,550 fatal accidents every year — the great risk is with people under the age of 25.   So what does that do to a coder up at 1AM, or how about a network analyst working on a BGP problem after being up for 18 hours.

Dr Eric Olson from Mayo Clinic explains that during sleep your system releases cytokines, which help you sleep but also increase to help with infection and inflammation – or help deal with stress.   If you do not get enough sleep, your system does not have what it needs and your entire immune system suffers.

I could go on for paragraphs about lack of sleep, insomnia, depression and anxiety, but the issue I want to bring light to is more about something I will call “Dedication Sickness”

200316789_4c557467c0_b

In 1999, while working for a large telecom company, I was a young 19 year old professional working on high end Nortel Networks platforms.  It was a great time in my career, working Option 11 all the way up to the big 81C PBX systems.    Large voicemail platforms even cut my teeth of Symposium Contact Centre.    Right in the middle of my career boom, and while at the top of my game I had a Friday night that would tickle any geeks fantasy.   Thursday was super busy, I was assisting with a large roll out at an insurance company that week and was pulling extra hour, and extra credit with the bosses by working until midnight – 1 AM every night deploying handsets.   Tonight I didn’t leave until 4.

M2250-2

I had started my day Friday morning with 2 hours sleep and my typical list of field tickets, a few phones to program, a card to install, nothing major.   I headed into downtown Toronto and started my work.      That evening I had a voicemail upgrade planned from Meridian Mail or CallPilot 1.07.   Why do I remember the version?  Well, if you are a CallPilot person you will know why, the upgrade was planned to go basically without a hitch.    I arrived around noon to start work, and the cut over was planned for 8PM.    At 8:01 I throw the switch, and everything was great, I was on cloud nine and packing up.

31czkDK+a4L

That’s when I got a call from someone else at a large financial firm, they had been working on an integration issue with Symposium Link for several hours and were getting nowhere.   I headed over at around 9 PM only a few blocks from where I was working.   This was an integrated contact centre with screen pops, desktop integration, database dips, the works — in 1999, I was super stoked to be helping on this one.   We worked until some time around noon the very next day.   Just before I left I remember using the bathroom and while washing up, my right eye was not closing right and I felt weird.   I also had some pain in my right ear.

Sunday is where it all went pear shaped.   I woke up unable to see out of my right eye, my eye was crusted shut.    I immediately got myself off to hospital where I was told that I had a condition called Bell’s Palsy.

bells-palsy-symptoms

It turned out I had an ear infection I didn’t know I had, and my lack of sleep over the past few days coupled with almost 48 hours without sleep resulted in that infection spreading to my facial nerve.

From Wikipedia..

Bell’s palsy is a form of facial paralysis resulting from a dysfunction of the cranial nerve VII (the facial nerve) causing an inability to control facial muscles on the affected side. Often the eye in the affected side cannot be closed. The eye must be protected from drying up, or the cornea may be permanently damaged resulting in impaired vision. In some cases denture wearers experience some discomfort. The common presentation of this condition is a rapid onset of partial or complete paralysis that often occurs overnight. In rare cases (<1%), it can occur on both sides resulting in total facial paralysis.

424px-Cranial_nerve_VII.svg

I spent the next 8 months in recovery, taking drugs that cost me close to $600 / Month, but luckily my employer foot the bill (actually the owner foot the bill on his personal credit card).  You know how people say you don’t know how someone feels till you walk a mile in their shoes?   Well, I spent 8 months with a physical disability, and I saw every single one of you that looked at me funny.  I was treated differently, spoken to differently and I felt awful.

Crazy anti-viral medications,  steroids that turned my stomach inside out and electro shock therapy.     I had to lubricate my eyes with goo every night and tape them shut.    The list goes on and on.  It was not a fun time.

This condition never went away 100%, to this day I have partial facial paralysis that I can feel constantly – as I write this I can feel it.   All because that many years ago, I didn’t know when to say enough is enough.

I now have a condition called synkinesis.    When the nerves broke during my condition, they normally grow back correct, but some of mine crossed (yes insert all the — yes Justin does have crossed wires jokes) the regrowth of nerves that controlled my eye lid, crossed with my chin and now when I blink, my chin moves sometimes, it’s quite annoying – and something that cannot be repaired.   I also ended up with Tinnitus – which seems to come and go since then.

Am I getting my point across?

If you are an employer,  you have a duty to watch out for your people.   I am proud to say I work for a company that closely monitors the work level of the staff to ensure things like this never happen, but I am sad to say most employers I have worked for not only fail to monitor for this, they drive people to work as many hours as they can.

If you are a professional, and somehow came across this blog entry and feel this affects you – send this blog entry to your employer.    Don’t do it,  I have permanent physical effects from working myself too hard, and they are with me for life.   Be reasonable with your work expectations with your employer, and do not think “but I need this job” — but you need your body and your life.

Thank you.

Rally Pace Notes… What does it all mean?

Ever watched Rally videos and wondered —  What is all that talk?

Those are pacenotes – a system used to tell the driver what is coming next.   However not all pace notes are made equal.     The idea is if done perfectly a driver could operate a rally car with their eyes basically shut.     The co-driver / navigator is reading notes, provided by the Rally, or written by them like this….

S8P8

Drivers use different systems depending on the driver.   Russian born but Canadian rally driver Leo Urlichich @crazyleo has a very custom notes system that includes finnish words and other phrases that only those who have worked with him will ever know, but he claims helps him greatly.

A co-driver can actually control the speed of the rally car, by adjusting note pacing, inflection, and timing the driver will actually drive faster or slower.   Many co-drivers really feel that they are actually in control of the rally car.   Co-Drivers / Navigators play a very significant role in the sport, they write/revise and arrange pace notes, do timing calculations, and are very involved in vehicle service on the roadside.    With the amount of work going on by the co-driver, many get road sickness from not looking out the window while reading notes and some use ginger, anti motion sickness patches and other methods to help deal with it.   Most cars — have a bag somewhere on board.

Canadian co-driving champion Alan Ockwell recently sat down with CRC Rally TV to talk pace notes and explain what this all means.  Alan also runs a co-driving school with the Maple Leaf Rally Club for those who really want to learn from one of the best co-drivers in Canadian history.

Canadian Rally Update – Baie Highlights / Black Bear

The CRC episode from the team at CARSRALLY on You Tube is not out yet, but we do have some highlights from the recent Rallye Baie Des Chaleurs in New Richmond QC saw some amazing action.     With Antoine L’Estage and Alan Ockwell taking the event by 3 Minutes and 28 seconds — it really was a good battle.  With Antoine dropping to third during only the second stage there was time to make up.    Smart choices throughout the day resulted in catching up and by the seconds leg at B1, Antoine took the lead and didn’t lose it, with Joël Levac / Stéphanie Lewis on their heels the entire event, at one stage within 1 second finish time.

Look for the CARSRALLY team to release a full CRC episode in the near future.

Continuing with coverage of the regional Ontario Provincial Rally Championship saw Sylvain Vincent and Dominique Cyr bring home the win with only 17 seconds lead with Martin Donnelly and Angela Cosner trading stage finish wins throughout the day.  An unfortunate conflict with a tree hurt Gary Sutherland and Kelly Mathew who were in contention to win the 2WD For this event, the car was not damaged, but with nobody to pull them out they had to wait for help from the sweep team.

IMG_7029

I provided CAR 99 support for this event and we helped 6 drivers throughout the day, with only 11 entries that means we put the hook on at least half the field with the Ontario Rally Sweep Team.   Good news, no medical support was necessary so my co driver Scott

11737888_10155779064795291_3936161399896219707_n

Black Bear is without a doubt a preview for regional competitors for the National Rally of the Tall Pines with many of the roads shared between the events.  Black Bear has a reputation as a “Car Killer” — including my own Car 99 took significant body damage and a hurt power steering system.

IMG_6782

One major off saw a competitor with large jump, bounce and then off against a tree.  Reminding us again that safety is a must and please – do not try this at home.   More coverage from the OPRC team when the video arrives.

Photos are courtesy of the  team at CDNRALLY.COM

IMG_6868

Three weeks to the Galway Cavendish Forest Rally and we are providing navigational support for the Ontario Rally Sweep Team.

Troubleshooting Like a Fish

When visiting an event like Cisco Live! it amazes you how some sessions strike a chord.   Smaller sessions like Catalyst 3K with Samer Theodossy @SamerTheodossy and his amazing team, innovating on the 3K platform.   Larger sessions like this one..

2015-07-13 15_50_20-BRKARC-2002.mp4 - VLC media player
You can search by BRKARC-2002 – I highly recommend watching the 2015 edition from San Diego, as it far exceeds the 2014 version.    The session is available on Cisco Live 365.

https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=83413   — Registration required

CCDE and Dual CCIE – Denise “Fish” Fishburne @denisefishburne is the Customer Proof of Concept Team Lead at Cisco.   Basically this means that Denise troubleshoots for a living and “makes things work” or works on the “Yeah show me that working” team.

Denise runs a great web site with even more great information – http://www.networkingwithfish.com/ – A bio from the website

Denise “Fish” Fishburne, (CCIE #2639, CCDE 20090014) is a team lead with the Customer Proof of Concept Lab (CPOC) in RTP, NC. In this role, Denise has the unique opportunity of helping customers see their network dreams move from conception to a reality. Denise has been with the CPOC for over 13 years and has been with Cisco 18 years. Fish loves troubleshooting, learning, & passing it on. She has been regular speaker at Networkers/Cisco Live since 2006.

The attempt here is in 2 hours to take 30 years of troubleshooting experience from Fish and download the method into our brains.   As someone only 18 years into my career, yes, some of this was a bit of a review, however reminding yourself about method, avoiding tunnel vision and getting out of your own way and the importance of good documentation was excellent.

I was accused of being a “sick pup” by Fish when I suggested that intermittent problems were fun (That’s me in the bright green golf shirt in the front row)

This was my favorite session at Live! and it was not even heavily “technical” – however the message was spot on.     It does not matter if you have been in tech for 2 years or 20 years, this session is a must.    If you are a manager of junior resources – give that resource 2 hours and have them watch this session as the concepts explained by Fish are absolutely spot on.   It is technology experts, with 30+ years experience who take the time to share their knowledge and experience with others in the industry that are a special bunch of people; not to mention Fish is an absolutely amazing human being.

On our last day I mentioned to Fish that the work she was doing, teaching sessions like this and sharing knowledge is of such amazing benefit to young professionals, and to never let anyone take that away as it is so vital in our industry for this type of knowledge and experience to be passed on.